HM11 is a range of Automatic Hot-Melt Case Sealers.
SIAT produces also a range of Hot Melt Case Sealers. The Hot-Melt technology can only be accepted by automatic machines, due to initial investment and cost reduction applicable on long runs.
Automatic hot melt case sealer with side drive belts and manual adjustment. It is designed to seal with hot melt glue boxes of the same size. The box, coming from a filling station with the bottom flaps sealed, is taken away by drive belts toward the machine where injectors dispense 4 strips of hot melt glue. A system of flap compression rollers provides the proper pressure of boxes. The hot melt sealing machine doesn’t require the presence of an operator except for the glue adjustments and feeding. It is equipped with safety panels to prevent an operator from coming in contact with moving or hot parts.
HM11 key features
HM11-TB
Automatic top-flaps-folder device
Manual adjustment on different box sizes by handles
Side drive belts (2 x 75 mm width each)
Drive belts speed 21 m/min.
2 motors kW 0,18 each
The top & bottom glue applicator dispenses the glue on the top and bottom flaps while boxes pass through the machine before top flaps folding
ROBATECH® hot-melt glue applicator on external carriage equipped with 5 Kgs tank, tube and glue dispenser
The glue dispenser adjusts glue temperature and volume
Storing of sealing programs
Timer setting to allow pre-heating adjustment
Box dimensions adjustment
Side safety protections with switches to disconnect electro-pneumatic circuits
Control panel equipped with: main switch start, stop button, stop emergency button and photocells to control the boxes glued
Output: up to 1000 bph
Adjustable working height 500 – 750 mm
OMRON PLC
HM11-T
Automatic top-flaps-folder device
Manual adjustment on the different box sizes by handles
Side drive belts (2 x 75 mm width each)
Drive belts speed 21 m/min
2 motors kW 0,18 each
The top glue applicator dispenses the glue on the top flaps while boxes pass through the machine before top flaps folding ROBATECH® hot-melt glue applicator on external carriage equipped with 5 Kgs tank, tube and glue dispenser
The glue dispenser adjusts glue temperature and volume
Storing of sealing programs
Timer setting to allow pre-heating adjustment
Box dimensions adjustment
Side safety protections with switches to disconnect electro-pneumatic circuits
Control panel equipped with: main switch start, stop button, stop emergency button and photocells to control the boxes glued
Output: up to 1200 bph
Adjustable working height 500 – 750 mm
OMRON PLC